MAG · Set-top boxes

MAG Boxes: Portal Configuration for SuperTV

MAG set-top boxes need no player at all — they ask for a portal URL and everything else takes care of itself.

2026-10-05Updated 2026-11-0810 min read

Unlike smart TVs, Informir MAG boxes are purpose-built IPTV receivers. You never install anything: the box boots, you register it within SuperTV, point it at the portal URL and the whole line-up — EPG included — appears on its own.

Why a MAG box is different

A MAG is not a smart TV and not an Android streamer — it is a dedicated IPTV client built by Informir. There is no app store, no APK and no Clouddy activation. Instead the firmware speaks the Stalker protocol and expects a portal: a URL that hands the box a channel list, an EPG and an archive.

That makes setup simpler than people fear. The box does the rendering; SuperTV supplies the portal. Once the MAC address is registered and the URL is entered, the MAG behaves like a native television service, navigated entirely by the supplied remote.

The one wrinkle is that a MAG carries whatever portal it was last pointed at — which is why second-hand boxes and demo units cause most of the first-run confusion. Clear the leftovers first and everything in this guide works the same on a MAG 250, 254, 256, 322, 410 or 520.

First boot and registration

1Connect and boot

  1. Plug in ethernet (recommended) or Wi-Fi and power the box. The first screen asks for a portal.

2Record your MAC address

  1. The MAC appears on the boot screen and in Settings, System Info. Write it down — it is needed for registration.

3Register on the SuperTV dashboard

  1. Log in at supertv.is, open the devices section, choose add set-top box and enter the MAC.

Portal settings

1Open portal settings

  1. Press the Settings key twice, then choose Servers and Portals (older firmware) or IPTV portals (newer firmware).

2Enter the portal URL

  1. Erase any default address and type the SuperTV portal URL shown in the dashboard next to your device.

3Save and reboot

  1. Save (leaving the page counts as save too), wait for the reboot, then join the portal with OK.

If the channel list is empty

Walk through this list in order — one of these always fixes it:

What the portal gives you

✓

Full channel list with logos

The portal menu looks like a native television service — no player skin, no separate apps.

✓

EPG on the timeline

Open the TV Guide from the remote's green button; catch-up streams work right from the archive rows.

✓

Parental pin

The adult channel group can be PIN-locked from Settings, Preferences, PIN.

✓

Favourites and groups

Groups mirror the SuperTV line-up, so the Lithuanian, Russian, Latvian and other blocks sit exactly where you expect them.

MAG versus an Android box

Both run SuperTV; only the setup route differs:

AspectMAG boxAndroid TV box / Fire Stick
SetupPortal URL + MAC registrationInstall app, sign in with device code
InterfaceNative portal menu, remote-drivenSuperTV app with EPG and favourites
Best forExisting boxes, older TVs with HDMINewer buyers wanting the full app
ContentSame line-up and accountSame line-up and account

A household can keep an older MAG on the main TV and add an Android box elsewhere without a second plan.

Recovering a second-hand box

A used MAG often arrives still pointing at the previous owner's portal.

1Factory reset first

  1. Settings, Smart Mode, Factory Reset. This clears leftover portals that cause most first-run failures.

2Re-check the firmware

  1. After the reset, confirm the firmware is current before entering any portal URL.

3Register the clean MAC

  1. Add the freshly reset box to the devices list, then enter the portal URL as in the steps above.

MAG owners' frequent questions

Do I need to install anything on a MAG box?

No. The MAG uses its built-in portal client. You register the device and enter a URL — there is no app to install.

The portal loads but there is no picture — what first?

Run the resolver restart (Settings twice, Playback, Restart Stalker/Resolver). It clears the most common portal state.

Can I run two MAG boxes on one subscription?

Yes, if your plan allows that many simultaneous devices. Register each MAC and watch the connection limit on the devices page.

Will a MAG box work with the multilingual line-up?

Yes. The groups come straight from the account, so the Russian, Lithuanian, Latvian and other blocks appear in the portal menu like any other.

A five-minute browser check first

Before touching the box, log into the SuperTV Web Player in a browser. If the channels play there, the account is healthy and any remaining problem is in the portal settings — a fast way to separate faults.

The Web Player also doubles as a second screen while the MAG occupies the living room, which is handy during setup if a football match is already under way.

Sellers' advice: If you bought the box second-hand, run Settings, Smart Mode, Factory Reset before registering — leftover portals from resellers cause most first-run problems.

Old boxes, new life

A MAG is the cheapest way to make another room watch SuperTV. Activate a plan and register the box today.

Choose a plan